2026 - October - Bill H.
Bill graciously hosted again on 17/10/26, and he always has some new surprises.
Bill's place has limited listening space, but he updates his equipment regularly, with a focus on good engineering rather than big spend.
Equipment
-
Early Sony SACD player with SACD disc for comparison
-
Edirol interface as voltage divider (attenuator)
-
miniDSP Flex pre-amp, X-over, EQ (with REW and DIRAC)
-
MTM plus Dayton 2 x 10" opposing subs (sealed enclosures)
-
Dayton PS 220 twin cone (point source) on 2 x 8" opposing subs (vented enclosures): how simple can you get? But compare them to the MTM's above.....
-
Early KLE speaker cables with 75 ohm coax inter-connects
-
Amps are ESP P101 180W @ 8 ohms; Silicon Chip (II) A-Class 20W @ 8 ohms.... all monoblocks....
Soem notes from Bill:
The MTM's are Vifa and ScanSpeak chosen originally by me (2002) as used in the ARIEL by Lynn Olson who (for the techno-minded) says: The Vifa 5.5" P13WH-00-08 midbass is refreshingly free of the muddled and confused sound of typical 7" and 8" polypropylene drivers. This is almost certainly due to the small size of the cone, which makes it more rigid, as well as careful Vifa engineering of the vented pole-piece assembly. The frequency response of this driver is also pretty remarkable, with a ruler-flat midband gently descending to a smooth 12 dB/Octave rolloff beginning at 5kHz. That means the crossover can be simple, and won't require midband equalization.
The flatness of the 5.5" Vifa driver is more unusual than it first appears. Since the ear is so sensitive to spectral imbalances in the midrange, most high-fidelity speakers have traditionally used modest equalization in the crossover to straighten out the crucial midrange. It is only in the last few years that we have started to see high-performance drivers that don't require any equalization, and the Vifa 5.5" midbass is an excellent example. (The only other one I can even think of is the Focal 6V415, and even that one has a small bump at 4.5kHz).
D2905/9500: This Scan-Speak tweeter is a combination of the 9300 dome assembly, front plate, and Ferrofluid damping, combined with the 9900 aerodynamic non-resonant rear chamber. Since I have a few reservations about the sonics of the 9900, that makes this the best all-around choice for the Ariel and ME2. The reports from the Ariel Builders Cluball agree: this is their favorite tweeter ... guess I better replace my old sticky-dome 9000's with the 9500's one of these days....




